This VS-R45 is a remote control panel that can maximize the use of Panasonic AV
HS450/410/400A/6000’s functions
Ask a question about this product
・It allows you to select materials for AV-HS450/410/400A/6000 main buses.
・One AV-HS450 or AV-HS410 can be operated by maximum of four units of VS-R45 by using HUB unit.
・One AV-HS6000 can be operated by maximum of six units of VS-R45 by using HUB uint.
・Between AV-HS400A and VS-R45 is connected with RS-422 only.
・It has flexible structure, which allows cable connection from three directions such as for the console and the rack installation.
・It adopts the same switching mechanism with Panasonic AVHS450/410/400A/6000, allowing easy operation with higher compatibility.
Intended Switcher (to use with) | AV-HS450 | AV-HS410 | AV-HS400A | AV-HS6000 | Remark | |
Operation Switches | Material Selection Buttons | 32 | 24 | 10 | 32 | Also used for Bus selection. |
PGM/PVW Button 1 1 – – CLN, PVW, PGM | 1 | 1 | – | – | ||
CLN/PVW/PGM Select Button | – | – | 1 | – | ||
PinP Trans Button | – | 1 | – | – | ||
SHIFT/FUNC Button | 1(Activate FUNCTION mode by pressing AUTO + SHIFT/FUNC) | |||||
AUTO Button | 1(Activate FUNCTION mode by pressing AUTO + SHIFT/FUNC) | |||||
Control | RS-422 | D-SUB 9Pin | ||||
LAN | RJ-45 (10/100Base-T) | |||||
Power | Input | DC +12V±5% | ||||
Power Consumption | Less than 10W | |||||
Operating Environment | 0℃ to 40℃ (or 32F to 104F) | |||||
1U size | ||||||
Dimensions / Weight | 420(W)×43.6(H)× 55(D)mm | |||||
Less than 3Kg | ||||||
Safety and Environmental Compliance | RoHS, MET, CE, GOST, FCC, VCCI |
1) AV-HS450
Main bus: KEY, PinP1, PinP2, DSK1, DSK2, AUX1, AUX2, AUX3, AUX4, PGM/A, PST/B
This LAN port is available for the connection of VS-R45 and AV-HS450. This LAN port is also use for software update. Please don’t use this port for other purpose.
2) AV-HS410
Main bus: KEY, PinP1,PinP2, DSK, AUX1, AUX2, AUX3, AUX4, PGM/A, PST/B This LAN port is available for the connection of VS-R45 and AV-HS410. This LAN port is also use for software update. Please don’t use this port for other purpose.
AV-HS410 needs to download plug-in software from Panasonic homepage and needs to install it in switcher.
3) AV-HS400A
Main bus: KEY, PinP, DSK, AUX, PGM/A, PST/B
Use for installation, update and maintenance purpose.
4) AV-HS6000
Bus names on the front panel of VS-R45 (KEY, PinP1, PinP2, DSK1 and etc.) correspond to the name of AV-HS450. Please assign from AUX1 to AUX16 to each bus when you connect between VS-R45 and AV-HS6000.
This LAN port is available for the connection of VS-R45 and AV-HS6000. This LAN port is also use for software update. Please don’t use this port for other purpose.
purpose. AV-HS6000 needs to download plug-in software from Panasonic homepage and needs to install it in switcher.